From: Anshuman Kanwar (anshuman@expertcity.com)
Date: Wed Apr 23 2003 - 13:06:51 EDT
Just to clarify (because I got a bunch of mails), I did try the -v option.
But thanks for the suggestion.
-ansh
e280-2.nwk#/usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Fire 280R (2 X
UltraSPARC-III)
System clock frequency: 150 MHz
Memory size: 2048 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 750 8.0 US-III 5.4
0 1 1 750 8.0 US-III 5.4
========================= IO Cards =========================
-----Original Message-----
From: Thomas Autry [mailto:tautry@jcpenney.com]
Sent: Wednesday, April 23, 2003 10:04 AM
To: anshuman@expertcity.com
Subject: Re: prtdiag does not print some sections on e280, 5.8
Did you try running with the -v option?
There are a couple of prtdiag patches out there at the moment for solaris 8
but
I don't recall the numbers. They can be found on sunsolve.
Thanks.
>Date: Wed, 23 Apr 2003 09:52:51 -0700
>From: Anshuman Kanwar <anshuman@expertcity.com>
>Subject: prtdiag does not print some sections on e280, 5.8
>To: sunmanagers@sunmanagers.org
>
>Hi Managers,
>
>I am trying to figure out the occupied memory slots in an e280 remotely.
>prtdiag for my other machines (5.9) prints:
>
>
>========================= Memory Configuration
>===============================
>
> Logical Logical Logical
> MC Bank Bank Bank DIMM Interleave Interleaved
> Brd ID num size Status Size Factor with
>---- --- ---- ------ ----------- ------ ---------- -----------
> CA 0 0 1024MB no_status 512MB 2-way 0
> CA 0 2 1024MB no_status 512MB 2-way 0
>
>
>but for this particular machine, running 5.8, it does not output 'Memory'
or
>'IO Cards' sections at all:
>
>
>e280-2.nwk#/usr/platform/sun4u/sbin/prtdiag
>System Configuration: Sun Microsystems sun4u Sun Fire 280R (2 X
>UltraSPARC-III)
>System clock frequency: 150 MHz
>Memory size: 2048 Megabytes
>
>========================= CPUs =========================
>
> Run Ecache CPU CPU
>Brd CPU Module MHz MB Impl. Mask
>--- --- ------- ----- ------ ------ ----
> 0 0 0 750 8.0 US-III 5.4
> 0 1 1 750 8.0 US-III 5.4
>
>
>========================= IO Cards =========================
>e280-2.nwk#uname -a
>SunOS e280-2.nwk 5.8 Generic_108528-15 sun4u sparc SUNW,Sun-Fire-280R
>
>Is there any other command/utility I can use to figure out physical memory
?
>Is there any way of fixing prtdiag?
>
>
>Thanks for the support,
>
>Anshuman Kanwar
>Unix SysAdmin
>Expertcity Inc.
>--
>(805) 690-5714 [off] ansh@expertcity.com
>(805) 895-4231 [cel] 5385 Hollister Ave
>(805) 690-6471 [fax] Goleta, CA. 93111
>_______________________________________________
>sunmanagers mailing list
>sunmanagers@sunmanagers.org
>http://www.sunmanagers.org/mailman/listinfo/sunmanagers
-----------------------------------------------------
Thomas Autry
UNIX Systems Administrator
I.S. / Catalog UNIX Network Systems
J. C. Penney Company, Inc.
P.O. Box 10001, Dallas, TX 75301-6108-F1
Business Office: 6501 Legacy Drive, Plano, TX 75024
Tel: 972-431-3911 Fax: 972-431-3480
E-mail: tautry@jcpenney.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:16 EDT