From: Meg Wall (meg991@yahoo.com)
Date: Fri Apr 18 2003 - 00:04:57 EDT
Hi Managers,
My jumpstart client won't talk to the server, can't figure out where
the problem is.
Solaris 8, sparc., all servers on the same subnet, boot server, profile
server and configuration server, image server is the same server. All
of the servers have two interface, one public ip, one internal ip
(10.x.x.x). The jumpstart server hme1 is the internal interface, the
client hme0 is the internal.
I want the client talks to server through the internal interface. Every
time, I get to this point and it hangs there:
Requesting Internet address for 0:0:e:x:x:x
SunOS Release 5.8 Version Generic _xxxxxx-xx 64 bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface hme1
configured interface hme0
/ (it spins forever here)
I did check documentation, believe I did profile right. The problem
doesn't seem to get to profile part yet. My sysidcfg file, the part
I'm not sure, I wrote: network_interface=hme0 {netmask=255.255.252.0}
Should I write hme1 here?
I tried both, none of them work, the same result. What could I miss
here? I believe I add client right, -e, -s, -c, -p, all paths are
right.
Thanks, I will summarize.
Meg
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:13 EDT