From: Simran Hansrai (sparc@pacbell.net)
Date: Wed Mar 26 2003 - 22:48:10 EST
Hi Guys,
This is probably a easy question for you guys. I am trying to access my
ultra5 box without a monitor but can seem to get it to work with
hyperterminal. I am sure this is possible because I remember doing this
a long time ago just not sure how the cabeling worked, but if anyone
knows what the specific connections are can you please advice me on how
to connect my cables? Right now I am connecting a DB25 to a RJ45
cyclades connector to the // port on the ultra5 and this connects to my
laptop through com1. I have the following settings on my Hyperterminal:
Bits per second: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: Hardware.
I kept everything to its default except the Bits per second and changed
it from a 2400 to a 9600. Is there something I am doing wrong? Any
suggestions or comments are very appreciated.
Thanks in advance,
Simran H.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:04 EDT