From: Simran Hansrai (sparc@pacbell.net)
Date: Sun Mar 02 2003 - 04:30:02 EST
Hi Guys,
I have a couple of easy questions for you guys. I have looked
everywhere but cannot find any info on this. I am trying to add 2 new
servers to my network and I am having some problems. I have Host A
connected to my main network and has 2 Nics. The 1st Nic is connected
to my main network and the gateway and the 2nd Nic is connected to
another switch and that is where I am connecting my 2 ultra 5's, on that
switch. I was able to get links on all my ports and h/w wise everything
looks good. However, I am unable to ping from Host A to the other 2
ultra 5's which are on the same switch (eth0 on Host A). Do, I need to
add a route on Host A? The following is my routing info on Host A:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.0.0 * 255.255.255.0 U 0 0 0
eth1 <------- connected to my main network
192.168.0.0 * 255.255.255.0 U 0 0 0
eth0 <------- connecte to the 2 U5's
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth1
Also, once I get that working is it possible to set the gateway for the
ultra 5's as Host A or do I have to somehow set the gateway as the g/w I
am using on the main network 192.168.0.1, so that I can get internet
access on these ultra 5's. Any suggestion or comments would be grately
appreciated. I will summarise once I get this to work.
Thanks in advance,
Simran H.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:55 EDT