From: Kumar Guhan (Kumar.Guhan@janes.co.uk)
Date: Fri Feb 07 2003 - 04:46:23 EST
Hi Managers,
I have a couple of V880s connected via fibre (jni 6410) to a tape library
(STK L40). We recently had a new tape drive put in the library, I made sure
st.conf had the relevant LUNs and targets along with sg.conf. And also made
sure the HBAs can see them. Through the ezfibre utility, I could see the
drive.
Ran the following sequence of commands
devfsadm -i sg
devlinks
And finally did a boot -- -r
But when I checked whether the drive was visible or not through sgscan, I
was not able to see the drive. Unfortunately this problem is holding our
backups inordinately. Any help would be appreciated.
Thanks,
Kumar
---------------------------------------------------------------------------
This e-mail, its content and any file attachments are confidential and may be legally privileged. If you have received this e-mail in error please do not copy, disclose it to any third party or use the contents or attachments in any way. Please destroy it and contact +44 (0)20 8700 3700 or e-mail administrator@janes.co.uk
The content of this message may contain personal views which are not the views of Jane's Information Group unless specifically stated.
Visit Jane's on the web at www.janes.com
---------------------------------------------------------------------------
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:47 EDT