From: Tony Magtalas (ttk67@yahoo.com)
Date: Thu Jan 09 2003 - 00:11:00 EST
Dear Sun Managers:
I ran into some weird boot up problems with a couple
of Netra X1 systems:
At the prompt "lom>" (light output management) on the
console on one unit, I tried to "poweron" the
unit but it did not respond to this command. When I
attempted to turn on the power using the power switch,
nothing happened. The power supply appears to be OK,
Also the "lom>" command showed the power supply was at
"standby mode". Is there any other way in "lom" mode
to set the power-on?).
On the second Netra unit, at the "lom>" command mode,
after I used command "poweron" it responded OK; but
when I tried to "boot normal" and "reset", it hung.
lom>bootmode -u normal
lom>reset
LOM event: +1h54m5s host reset
The system was supposed to drop down to the ok prompt
or proceed to boot all the way.
Instead it hung after reset.
Has anybody seen these weird problems with the Netra
X1? Any feedback would be very much appreciated.
TIA
Tony
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:33 EDT