From: O'Neill, Paul (IT) (Paul_O'Neill@adc.com)
Date: Tue Nov 19 2002 - 09:48:13 EST
Dear Sun Managers,
Thanks to Carl [carl_ma@scotiacapital.com] for his response:
"We did use the Multipack-FC with Brocade 3200 switch. Sun multipack only supports FC-AL, so you
can not use Fabric switch but quickloop. In quickloop mode, you can use Fabric Assistant to
zoning your multipack."
I am investigating Quickloop, which is an additional software module. We will probably purchase
a Brocade SilkWorm 3800 16 port switch to attach our Sun Storedge Multipack-FC devices.
> -----Original Message-----
>
>
> Dear Sunmanagers,
> Has anyone connected a Sun Storedge Multipack-FC device to
> a fibre channel switch? If so, did you use SAN zoning to accomplish this implementation?
> We have some of these Sun Storedge Multipack-FC and we would like them to be
> included in a SAN implementation. Which switch vendor did you use? Any problems
> to watch out for?
>
> I will summarise and acknowledge all answers. Please note that I've checked Sun docs, Sun Solve
> and many of the archives on Sun Managers and there is no mention of this proposed implementation.
> What ever happened to the search facility on the SunManagers web site?
>
> regards,
>
> Paul
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:19 EDT