From: Gene Beaird (gene.g.beaird@mail.sprint.com)
Date: Tue Nov 19 2002 - 09:51:31 EST
Hi all,
I have an E220 that was set up by a predecessor that has an A1000
connected to it. The system is a development box, so not a lot of
attention was paid to it when it was set up. The system was set up
without Raid Manager installed. The A1000 is running 4X18 GB disks set
up as one LUN.
Now, the A1000 has a failed disk. My question is, even without RM
installed, is the disk switch out process the same? That is, pull the
old HDD, wait at least 30 seconds, insert the replacement HDD and let
the system rebuild? Thanks for your info.
Gene Beaird
Houston, Texas
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:19 EDT