From: Roddy McColl (roddy@physicsgate.swmed.edu)
Date: Thu Nov 14 2002 - 12:11:05 EST
I contacted the manufacturer of this Sparc clone, Tritec (www.tritec.de)
and they were kind enough to send me a manual. Turns out they built
two SS20 models, the S-20I and the S-20L. With the S-20I you can use
a single VSIMM in location J0202 to activate the SX graphics.
With the S-20L, although there are slots to support the VSIMM and a
13W3 output on the motherboard, it is not supported, so only SBus grahics
can be used.
-roddy
Roddy McColl
UT Southwestern
Dallas, Texas
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:17 EDT