From: Kathleen Ellis-Lasser (kathleen@umbc.edu)
Date: Fri Nov 08 2002 - 17:36:56 EST
All,
We're running Networker 5.5.1 on an Enterprise 6000 with Solaris 2.6, and
just today I started getting errors under Networker. We have a Sun ETL
4/1800 jukebox. Trying to do tape changes today I started getting errors
from nsrjb:
bash-2.05$ sudo nsrjb -Cv
setting verbosity level to `1'
nsrjb: SJI driver not loaded!!! See installation instructions.
nsrjb: SYSTEM error, Bad file number
I can run nwadmin, but if I try to do anything (mount/unmount tapes,
inventory, label) I get another Bad file number error in a pop-up window.
Not having a clue what to do I'd be tempted to blow away my devices and
run drvconfig ; tapes, but there's a catch: drvconfig hangs. I installed
some new A1000 disk arrays over last weekend and ever since we installed
Raid Manager drvconfig just doesn't work. There is a symlink in /devices
to /devices ever since the Raid Manager install and that may be the
problem..is that supposed to be there?
I have restarted the ETL 4/1800 and no dice; I can reboot if it's
reeeallly necessary.
Thanks to all for the consideration, I will happily post a detailed
summary if anyone has an answer.
Best,
Kathleen
Kathleen M. Ellis, Unix Administrator
Center for Health Program Development and Management
SS 201 x6863
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:15 EDT