From: Jeff Wellens (jeffw@pbs.com)
Date: Fri Oct 25 2002 - 17:58:58 EDT
I had to run command: vxdctl enable
Veritas now sees the drive.
Thanks to Mike Kail for the quick response!
-----Original Message-----
From: sunmanagers-admin@sunmanagers.org
[mailto:sunmanagers-admin@sunmanagers.org]On Behalf Of Jeff Wellens
Sent: October 25, 2002 4:45 PM
To: sunmanagers@sunmanagers.org
Subject: Problems adding a disk to Veritas
Hello All:
We had a disk go bad on our server (c1t13d0). This disk didn't even show up
when doing a format command.
We hot swapped it with a working disk. This drive now shows up fine using
the format command.
But, when I try and add it to Veritas I get the following message:
vxvm:vxdisk: ERROR: Device c1t13d0s2: define failed:
Device path not valid
If I run vxdisk list it doesn't show up in this list at all either. How do
I go about getting Veritas to see this new disk??
Thanks for your help!!
Jeff Wellens
Publishing Business Systems
Technical Support Analyst
jeffw@pbs.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:10 EDT