From: Jaime Menendez (correomitu@hotmail.com)
Date: Tue Oct 01 2002 - 13:39:47 EDT
Thanks all for the answers. Jaime Menendez wrote:
>
> Hi all,I have connect a notebook to E450 console port.eeprom command
> reply the next: output-device=screen ttya ttyb
> input-device=keyboard ttya ttyb When i try to connect to the machine my
> terminal is blank, i don4t receive information from machine. Anybody
> knows what i forgot to change or to add in my configuration to connect
> with console port?. Thanks in advanced.
>
You do not need to alter the output and input device. Go with the
default values.
The Sun machines automaticly redirects to ttya if a keyboard is NOT
connected,
this is done during boot of the machine. In other words, boot without
the
keyboard attached.
Make sure your terminalprogram is setup as 9600bps 8 bits, no parity, 1
stopbit.
Also make sure you have a nullmodem cable. A straight serial cable will
not do.
The cable is also sometimes called tipcable.
Regards
------------------------------------------------------------------------
MSN Fotos: la forma mas facil de compartir e imprimir fotos. Haga clic
aqum
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:01 EDT