From: Nick Tchoudinovskikh (nick@mmk.ru)
Date: Mon Sep 02 2002 - 10:07:14 EDT
Hi!
Thanks to Hindley Nick
try adding the line
name="sd" class="scsi"
target=0 lun=1;
then boot -r
>>Hi all!
>>I have UltraSPARC-IIi-Engine station with IFT RAID controller.On this
RAID i have 1 logical >>drive.
>>At addition of the new logic driver, i create new LDR=1 on the RAID
Controller. I check in >>OpenBoot: ok probe-scsi-all
>>/pci@1f,0/pci@1/scsi@1,1
>>target 0:
>> Unit 0 IFT .....(my logical drive 0)
>> Unit 1 IFT ......(my new logical drive 1)
>>target 3:
>> My plextor CDROM
>>ok boot -r (reconfigure my system)
>># format
>> AVAILABLE DISK SELECTIONS:
>>0. c0t0d0 <IFT-3200-0311 cyl 35001 alt 2 hd 64 sec 32>
>> /pci@1f,0/pci@1/scsi@1/sd@0,0 (This is my old logical drive)
>>Specify disk (enter its number):
>>I do not see my new logic disk.
>>I tried to do manually (drvconfig, devlinks, disks) - result same.
That I do not correctly?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:52 EDT