From: Nick Tchoudinovskikh (nick@mmk.ru)
Date: Mon Sep 02 2002 - 09:24:35 EDT
Hi all!
I have UltraSPARC-IIi-Engine station with IFT RAID controller.On this
RAID i have 1 logical drive.
At addition of the new logic driver, i create new LDR=1 on the RAID
Controller. I check in OpenBoot:
ok probe-scsi-all
/pci@1f,0/pci@1/scsi@1,1
target 0:
Unit 0 IFT .....(my logical drive 0)
Unit 1 IFT ......(my new logical drive 1)
target 3:
My plextor CDROM
ok boot -r (reconfigure my system)
# format
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <IFT-3200-0311 cyl 35001 alt 2 hd 64 sec 32>
/pci@1f,0/pci@1/scsi@1/sd@0,0 (This is my old logical drive)
Specify disk (enter its number):
I do not see my new logic disk.
I tried to do manually (drvconfig, devlinks, disks) - result same. That
I do not correctly?
Best regards.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:52 EDT