From: Matt Wells (matt.wells@thirdspace.tv)
Date: Wed Aug 21 2002 - 10:27:21 EDT
Greetings Sun Managers
I have a Netra X1 (history unknown - no cdrom) which has Sol 8 on it but
cannot see it's ethernet
interfaces. When I connect to the serial port, on boot I get:-
SunOS Release 5.8 Version Generic_108528-09 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
ifconfig: plumb: eri0: Bad file number
ip_rput_dlpi(eri1): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ip_rput_dlpi(eri1): DL_ERROR_ACK for DL_BIND_REQ(1),
errno 3, unix 0
ip_rput_dlpi(eri1): DL_ERROR_ACK for DL_PHYS_ADDR_REQ(49), errno 3, unix 0
ip_rput_dlpi(eri1): DL_ERROR_ACK for DL_UNBIND_REQ(2), errno 3, unix 0
ip_rput_dlpi(eri1): DL_ERROR_ACK for DL_DETACH_REQ(12), errno 3, unix 0
ifconfig: SIOCSLIFNAME for ip: eri1: no such interface
moving addresses from failed IPv4 interfaces: eri0
(couldn't move, no alternative interface) eri1 (couldn't move, no
alternative
interface).
Hostname: harry
The system is coming up. Please wait.
etc
ifconfig -a gives me
ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4>
mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
but no eri0 or eri1 ports. When these ports are
plugged into a hub however the link light becomes
active and flickers.
Is this a hardware prob or something simpler?
Will summarize.
regards
Matt
Matt Wells
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:49 EDT