From: R. Marc Baldus (rbaldus@e-one.com)
Date: Wed Aug 14 2002 - 20:14:04 EDT
Guru's
Sun V880
Solaris 8 2/02
I attempted to configure the system to use RSC as the system console. I
did this by first downloading the RSC 2.2 package from Sun and adding
the packages to the V880. I then dropped down to the ok prompt and type:
ok diag-console rsc
ok setenv input-device rsc-console
ok setenv output-device rsc-console
ok reset-all
I am using an Annex terminal console. First, I was connected to the
serial console port and all worked fine. After rebooting the V880, I
connected an RJ45 cable to the serial port of the RSC and to the same
port of the Annex box. I longer have a console.
How do I fix this? Is it as simple as a stop-n "like" command? I read
in the "Sun Fire 880 Server Owner's Guide" that I can press the power
button twice after power on to reset the NVRAM but it has not helped.
It only turned the V880 off.
Marc B.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:47 EDT