SUMMARY: force Netra T1 eri full duplex

From: Kwan, William (wkwan@grow.net)
Date: Wed Jul 31 2002 - 09:42:43 EDT

• Next message: Briscoe, Kris (CCI-Atlanta): "Frontpage/Apahce/ Solaris"
• Previous message: Wanke Matthias: "LDAP: Use Sol 8 or 9?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks for all the helps.
Problem: force full duplex and no autoneg in /etc/system doesn't work with
eri interface on Netra T1

Solution:

#1: Start up script
e.g. ndd -set /dev/eri instance 0
     ndd -set /dev/eri adv_100fdx_cap 1
     ndd -set /dev/eri adv_10fdx_cap 0
     ndd -set /dev/eri adv_10hdx_cap 0
     ndd -set /dev/eri adv_100hdx_cap 0
     ndd -set /dev/eri adv_autoneg_cap 0

#2: set format in /etc/system for eri is different from hme
hme uses this format:
   set hme:hme_adv_autoneg_cap=0

eri uses this format:
   set eri:adv_autoneg_cap=0
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Briscoe, Kris (CCI-Atlanta): "Frontpage/Apahce/ Solaris"
• Previous message: Wanke Matthias: "LDAP: Use Sol 8 or 9?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:41 EDT