SunBlade 1000 Fails on Boot

From: Michael McCullen (mmccullen@mwm-tech.com)
Date: Thu Dec 06 2007 - 00:10:12 EST


I have a SunBlade 1000 (2x750 UltraSparc III, 2048MB RAM) running
Solaris 10 that lost power unexpectedly a few days back. On booting
I now get the following console messages:

.Probing system devices

      ERROR: /: Last Trap: Corrected ECC Error

      ERROR: /: Last Trap: Corrected ECC Error

Can't open device
Stack Underflow
ok

Executing a boot command nets the following:

ok boot
      FATAL: OpenBoot initialization sequence prematurely terminated.

FATAL: system is not bootable, boot command is disabled

A print out of the banner looks like this, which seems really bad
ok banner

, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 0 MB memory installed, Serial #0.
Ethernet address 0:0:0:0:0:0, Host ID: 00000000.

The IDPROM contents are invalid

Even trying to reboot from the ok prompt yields this:

ok reset-all
      ERROR: Last Trap: Fast Data Access MMU Miss

Error -256
ok

Anyone have any ideas on what I should look at to restore this
machine? Or is it totally bricked?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:35 EDT