From: Stephanie C (stepchung@gmail.com)
Date: Fri Oct 19 2007 - 17:45:37 EDT
I created a zone with a 2nd NIC card (hme0) and everything was creating
fine. 'zone1' is in 'ready' state. The problem is I cannot boot zone1.
#zoneadm list -v
ID NAME STATUS PATH
0 global running /
6 zone1 ready /data/zone1
zoneadm -z zone1 boot ----> hang for a very long time, had to 'ctrl c' to
get out
Tried all commands: halt, uninstall, reboot, ready...All hang for a very
long time, had to 'ctrl c' to get out.
Here is odd thing.
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
-----> (global zone)
inet 209.15.31.34 netmask ffffffe0 broadcast 209.15.31.63
ether 0:3:ba:16:b9:89
hme0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3 ---->
(zone1)
inet 209.25.54.23 netmask ff000000 broadcast 209.25.5.63
ether 0:3:ba:16:b9:89
-----> hang here for a very long time, had to 'ctrl c' to get out
I know it may resolve by reboot the server. But it is not an option for me
because it is in production. Any hints? Thanks.
Stephanie
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:26 EDT