From: Max Levine (maxpil@gmail.com)
Date: Tue Jun 12 2007 - 10:58:35 EDT
All,
I am having some confusion determining the duplex of bge interfaces.
V240
Solaris 8 HW 12/02 s28s_hw1wos_06a SPARC
duplex settings disagree. running checkcable (version .98) shows :
Interface Link Duplex Speed AutoNEG
bge0 UP HALF 1000 ON
netstat -k shows duplex is "full" however!
bge0:
opackets 19514 ipackets 28183 oerrors 0 ierrors 0 collisions 0
obytes 3093832 rbytes 4609704 multixmt 27 multircv 2285 brdcstxmt 39
brdcstrcv 6670
unknowns 0 blocked 0 ex_collisions 0 defer_xmts 0 align_errors 0
fcs_errors 0 oflo 0 uflo 0 runt_errors 0 missed 0 tx_late_collisions 0
carrier_errors 0 noxmtbuf 0 norcvbuf 0 xmt_badinterp 0 rcv_badinterp 0
intr 36183 xmtretry 0 opackets64 19514 ipackets64 28183 obytes64 3093832
rbytes64 4609704 ifspeed 1000000000 duplex full media twpair promisc
off first_collisions 0
multi_collisions 0 sqe_errors 0 macxmt_errors 0 toolong_errors 0
macrcv_errors 0
ndd /dev/bge0 link_duplex
1
which is correct?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:03 EDT