From: Oskar (oskar_pienkos@sfu.ca)
Date: Thu May 03 2007 - 17:21:42 EDT
Hello Fellow Admins,
I have a couple of PCI FC Emulex LP10000-S on a v490 running Sol10 11/06
and cannot configure them.
I re-installed the driver SUNWemlxs, patched it with 120222-11, rebooted
with the reconfigure option, however after I run
cfgadm -c configure c2 and c3 they still show unconfigured.
# cfgadm -al
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured
unknown
c0::dsk/c0t0d0 CD-ROM connected configured
unknown
c1 fc-private connected configured
unknown
c1::21000011c68dd3aa disk connected configured
unknown
c1::21000011c68dd897 disk connected configured
unknown
c2 fc-fabric connected unconfigured
unknown
c2::500a098383115e88 unknown connected unconfigured
unknown
c2::500a0983838152ea unknown connected unconfigured
unknown
c2::500a098c83115e88 unknown connected unconfigured
unknown
c2::500a098c838152ea unknown connected unconfigured
unknown
c3 fc-fabric connected unconfigured
unknown
c3::500a098183115e88 unknown connected unconfigured
unknown
c3::500a0981838152ea unknown connected unconfigured
unknown
c3::500a098a83115e88 unknown connected unconfigured
unknown
c3::500a098a838152ea unknown connected unconfigured
unknown
Has anyone seen this before?
On top of that sunsolve seems to be down.
Thanks a lot.
-- Oskar P _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:56 EDT