From: Gary Brett (gary.brett@fidessa.com)
Date: Thu May 03 2007 - 07:17:17 EDT
Hi there
On my v440 if I want to mirror the root/boot disk then in multiuser mode
I just type
# raidctl -c c1t0d0 c1t1d0
Volume 'c1t0d0' created
And all is good
However.....on my x4100 if I do the same (mirror the root disk) it says
# raidctl -c c0t0d0 c0t1d0
Cannot create RAID volume, disk "c0t0d0" is mounted
Strange message because of course its mounted ! it's the root filesystem
!! Ive seen some docs online that suggest you cant create a raid volume
with mounted filesystems on the master disk and that you need to boot it
off the network using "boot net -s" but you obviously can because I did
it on the v440
Is this supposed to happen or is there a problem with my x4100??
Any help would be greatly appreciated
*****************************************************************************
*****************************************************************************
**********************************
This message is intended only for the stated addressee(s) and may be
confidential. Access to this email by anyone else is unauthorised. Any
opinions expressed in this email do not necessarily reflect the opinions of
Fidessa. Any unauthorised disclosure, use or dissemination, either whole or in
part is prohibited. If you are not the intended recipient of this message,
please notify the sender immediately.
Fidessa plc - Registered office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3781700 VAT registration no. 688 9008 78
Fidessa plc - Registered Office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3234176 VAT registration no. 688 9008 78
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:56 EDT