From: Tom Hart (tom.hart@huntingtonhospital.com)
Date: Thu Jul 18 2002 - 11:39:32 EDT
Hello all, and thanks in advance for any help!
I am running a Sun Netra with 2x300 Mhz procs, OS is 5.6. I have had to
restore a 4.8 Gb filesystem to a raid 5 array due to the failure of 2
drives. The restore is running with no error messages displayed from a
DLT7000 drive. Problem is this, the restore has been running for 32
hours and has 200 Mb to go. Currently, the restore is proceeding at the
rate of 10k every 5 minutes or so. The restore started out by writing an
esitmated 60 to 80 percent of the data in the first hour or so, since
then the rate has slowed consistently with the passage of time. The
processor utilization has increased from an initial 2% slowly to 48%
now. I have had to restore relatively small user directories in the past
(100 - 500mb) that took some time (~1.5hr) but nothing like this.
Thanks again.
Tom Hart
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:37 EDT