From: Ian Topham (Ian.Topham@digica.com)
Date: Mon Mar 12 2007 - 06:40:09 EST
Hi Gurus
A quick question - does sunvts see the Storedge 3510 as just
LUNs/disks, or is there some means of running diags from within the vts
suite to include testing of a 3510 array?
We have 2 x 3510s in a cluster, one disk in 1 array has failed and
caused corruption in an Oracle database; firmware revision is 3.27R.
This will be upgraded to 4.15F later today, but we can find no means of
running standalone diags on the 3510 to confirm all is well.
Any ideas/help appreciated.
Thanks - Ian
This email is confidential and may be privileged. If you are not the intended
recipient please notify the sender immediately and delete the email from your
computer. You should not copy the email, use it or any purpose
or disclose its contents to any other person. Please note that any views or
opinions presented in this email may be personal to the author and do not
necessarily represent the views or opinions of Digica. It is the
responsibility of the recipient to check this email for the presence of
viruses. Digica accepts no liability for any damage caused by any virus
transmitted by this email.
Digica Group Limited
Registered in England No. 5244928
Digica Limited
Registered in England No. 3434654
Digica (FMS) Limited
Registered in England No. 3798091
Registered address: Phoenix House, Colliers Way, Nottingham, NG8 6AT UK
Reception Tel: + 44 (0) 115 977 1177
Support Centre: 0845 607 7070
Fax: + 44 (0) 115 977 7000
http://www.digica.com
SOUTH AFRICA: Building 3, Parc du Cap, Mispel Road, Bellville, 7535, South
Africa
Tel: + 27 (0) 21 957 4900
Fax: + 27 (0) 21 948 3135
http://www.digica.com
This message has been scanned for viruses by Surfcontrol in Partnership with
Digica
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:45 EDT