From: Rob Brown (Rob.Brown@ioko.com)
Date: Tue Feb 20 2007 - 06:40:04 EST
Hi,
I'm assuming it's possible to set the system controller on a T2000
system from the command line?
I can log on to the system but not the system controller. The problem
is the gateway on the sc which I need to set to the correct value. With
other sun kit I could just use something like scadm to set it. What is
the command to do this on a T2000?
Failing that I need to set the locator light. Is it possible to do
this from the OS?
Regards
rob brown
ioko
---------------------------------------------
1, Innovation Close,
Science Park,
Heslington
Yorkshire YO10 5ZD
---------------------------------------------
* rob.brown@ioko.com | * 07769 711 885 | * 01904 438 000
Communications on or through ioko's computer systems may be monitored or
recorded to secure effective system operation and for other lawful purposes.
Unless otherwise agreed expressly in writing, this communication is to be
treated as confidential and the information in it may not be used or disclosed
except for the purpose for which it has been sent. If you have reason to
believe that you are not the intended recipient of this communication, please
contact the sender immediately. No employee is authorised to conclude any
binding agreement on behalf of ioko with another party by e-mail without prior
express written confirmation.
ioko365 Ltd. VAT reg 656 2443 31. Reg no 3048367. All rights reserved.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:40 EDT