From: SunAdmin (sunsysadmin@gmail.com)
Date: Thu Feb 15 2007 - 13:20:05 EST
Hello List,
On a Solaris 10 Update 3 SPARC system svc-volfs fails to start. The
service runs the following command. Trying to debug I ran this script
with "sh -x" and it appears to hang while doing devfsadm -i vol. Any
ideas?
# sh -x /lib/svc/method/svc-volfs start
FMRI=svc:/system/filesystem/volfs:default
+ . /lib/svc/share/smf_include.sh
SMF_EXIT_OK=0
SMF_EXIT_ERR_FATAL=95
SMF_EXIT_ERR_CONFIG=96
SMF_EXIT_MON_DEGRADE=97
SMF_EXIT_MON_OFFLINE=98
SMF_EXIT_ERR_NOSMF=99
SMF_EXIT_ERR_PERM=100
config_file=/etc/vold.conf
+ svcprop -c -p vold/config_file svc:/system/filesystem/volfs:default
val=""
+ [ -n "" ]
+ [ "" != "" ]
+ [ ! -f /etc/vold.conf ]
+ /sbin/zonename
+ [ global != global ]
+ [ ! -x /usr/sbin/vold ]
+ [ ! -f /dev/volctl ]
+ devfsadm -i vol
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:38 EDT