From: Steven Sim (steven.sim@faplccc.net)
Date: Thu Feb 01 2007 - 09:44:18 EST
Gurus;
I tried the following command;
#ssh admin@192.168.2.4 "dd bs=128k files=1 if=/dev/rmt/0n" | ufsrestore
bxf - 64k <my file list>
I was able to restore the required files. However the above command does
not end automatically after the restoration.
It simply hangs after the "set owner/mode for '.'? [yn]" (after I enter "y"
to the question)
It simply hangs there.
????
I am not allowed to use the public/private key to automate the login.
(long story). So the above goes into interactive login but the thing is,
the restoration works! (after I manually authenticate)
I have tried variations of the above command;
#ssh -T admin@192.168.2.4 "dd bs=128k files=1 if=/dev/rmt/0n" |
ufsrestore bxf - 64k <my file list>
Again, the restoration works but the command hangs at the same place
(after the "set owner/mode for '.'? [yn]" question)
Warmest Regards
Steven Sim
Fujitsu Asia Pte. Ltd.
_____________________________________________________
This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify us immediately. You should not copy
or use it for any purpose, nor disclose its contents to any other person.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:34 EDT