From: Henry Jhon PEŅA PRADO (tivoce@gmail.com)
Date: Tue Jan 16 2007 - 16:06:11 EST
Hello Sun Managers:
*I'm installing a Tape in my Sparc 5. The system works whit Solaris 2.4.*
When I boot the system without the tape it starts normally. But, the problem
is when I put the tape... and I have this message:
*Can't read disk label
Can't open disk label package
Can't open boot device*
...
In the prompt I did:
ok probe-scsi-all
Target 3 Disk SEAGATE
Target 4 Removable only Tape ARCHIVE // my TAPE
Target 6 Removable Read only device TOSHIBA XM- // my CDROM
ok boot -r
Can't read disk label
Can't open disk label package
Can't open boot device
I check with the commnad 'devalias' and all the paths are ok. I* probe when
2 different tapes and I format the disk using the command format booting the
system without the tape*. But I've the same error when the tape is
connected.
Someone can help me? Thanks.
HPP.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:28 EDT