From: Jeremy Rodriguez (jrodriguez@intellinet-tech.com)
Date: Tue Jul 16 2002 - 15:39:21 EDT
Question:
>I am currently adding an IDE disk to a Sun Blade 100 running Solaris 8. The
> disk is a 40 gig Maxtor - Model D740X. I have added a /reconfigure, I was
> wondering do I need to add an entry in the /etc/format.dat? Basically when
I
> issue the command format, it is only showing me one disk. I also have
tried
> the commands drvconfig, devfsadm, and disks, none of which worked. All I
> want to do is to get the OS to recognize the disk and make it a separate
> partition.
Answer:
Make sure jumpers are set correctly, in this case all cable select.
Then from the ok probe-ide.
Thank you to all who replied!
Mike, DD, LP, Stan, RB, TU, GM, RH, HM, AM
I will just add initials.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:36 EDT