From: john hanson (datareactor@yahoo.com)
Date: Wed Jan 03 2007 - 16:05:48 EST
Dear Gurus
I have 2 node ( V440 ) cluster running vcs/vxvm ( 4.1
) on Solaris 9
which are connected to two 3510 FC array ( Directly
attached Storage ), and lUNs are mirrored cross for
HA.
Objective
==========
a) Upgrade the disk in Storage from 72gb to 300gb (
Migrate data as well )
b) Introduce Brocade Fabric switches ( 200e ) and
connect each Storage to FC switch
and connect each node to FC switches.
Questions
----------
Here the steps i want to take . please guide if i am
missing anything
Is there anything that i have to edited in VCS or
Vxvm.
Steps for replacing second storage ( to be done on
passive node )
====================================
boot the system into Single User Mode ( without
cluster )
Break the mirror
Remove the Secondary Path to Second Storage (B)
Install Brocade FC switch 1
Upgrade the Second Storage (B)
Connect the Second Storage (B) to FC Switch 1
Connect the passive node to FC switch 1
Reboot the Machine to detect new Controller
Configuration
verify LUNs check format output etc
Migrate the data from Storage A to Storage B (
ReMirror again )
Steps for replacing the first storage
=======================================
Failover to passive node
will be same as above .( Reync with Second Storage )
Thanks in advance .
Regards
JH
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:25 EDT