From: michael_warnock@vanguard.com
Date: Mon Oct 16 2006 - 11:18:47 EDT
Hi-
solaris8
Sun Qlogic cards
mpxio
----------------
I currently have:
primary / online
primary / online
configuration
load-balance="none"; in scsi_vhci.conf file
and
auto-failback="enable"; in scsi_vhci.conf file.
Controller /devices/ssm@0,0/pci@19,600000/SUNW,qlc@1/fp@0,0
Device Address 50060482c46547fa,3
Host controller port WWN 210000e08b81f7c6
Class primary
State ONLINE
Controller /devices/ssm@0,0/pci@1d,600000/SUNW,qlc@1/fp@0,0
Device Address 50060482c46547cc,3
Host controller port WWN 210000e08b811b35
Class primary
State ONLINE
I would expect/like to see
primary : ONLINE
secondary : STANDBY
I have reviewed the STMS install and config guide.
How would I accomplish this?
Any comments / recommendations / suggestions on these types of
configurations?
Thank you.
Michael Warnock
UTS/x38031
----------------------------------------------------------------------
CONFIDENTIALITY STATEMENT. The information contained in this e-mail message, including attachments, is the confidential information of, and/or is the property of, Vanguard. The information is intended for use solely by the individual or entity named in the message. If you are not an intended recipient or you received this in error, then any review, printing, copying, or distribution of any such information is prohibited, and please notify the sender immediately by reply e-mail and then delete this e-mail from your system.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:01 EDT