df -h command complains a line in /etc/mnttab has too many fields

From: Tony Magtalas (ttk67@yahoo.com)
Date: Mon Sep 11 2006 - 14:42:17 EDT

• Next message: Andrew Bergman: "adding SCSI DAT72 tape devices on Sol9 x86"
• Previous message: Alan Davis: "not getting Gbe transfer rates on new T2000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi there,

Has anyone run into this problem?
I tried to run a "df -h" command on a Solaris 9 system.
It complains : a line in /etc/mnttab has too many fields

Thanks,
Tony
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Andrew Bergman: "adding SCSI DAT72 tape devices on Sol9 x86"
• Previous message: Alan Davis: "not getting Gbe transfer rates on new T2000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:46 EDT