From: David L. Markowitz (dav@rttrek.com)
Date: Fri Aug 11 2006 - 14:18:10 EDT
Original question:
> I have an Ultra 45 with an XVR-100 running Solaris 10 6/06.
> This board has two head capability, with one VGA out and one DVI out.
> It defaults to using to VGA.
> How do I switch it to use the DVI instead of the VGA?
What I discovered is not an answer to this question, but rather
two notes that make it moot in my case. Both of these are from
the XVR-100 installation guide:
Note - The maximum supported screen resolution for the DVI port
is 1280 C 1024.
Note - Only the Sun XVR-100 graphics accelerator HD15 video output
connector can provide console output. You cannot set the DVI video
connector as the console.
Since I'm using a 24" LCD at 1920x1200, as my console, I guess I'll
stick with VGA. The picture is beautiful anyway.
--
David L. Markowitz
dav@rttrek.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:36 EDT