Can I configure IPMP with ce1 and ge0 ?

From: SangIn Park (psisunm@gmail.com)
Date: Fri Jun 16 2006 - 05:33:38 EDT

• Next message: Langston, Jim: "SUMMARY: t2000 Visio stencil"
• Previous message: Laurence Moughan: "LTO tape in permission denied state ??"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, Gurus.,

I'll try to configure IPMP with ce1(copper) and ge0(fc). The documents
of SUN are not seeing about interfaces. But, Sun recommended IPMP use a
same type, and they say IPMP is not configuring a same type, example,
Ethernet and ATM, etc. refer to

    "Physical interfaces in the same IPMP group must be of the same
    type. For example, you cannot have an Ethernet interface and an
    Asynchronous Transfer Mode (ATM) interface in the same group"

Have you reference to configure IPMP with ce(cooper) and ge(fc)? Can I
configure IPMP with ce1 and ge0?

THANKS.,
PSI
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Langston, Jim: "SUMMARY: t2000 Visio stencil"
• Previous message: Laurence Moughan: "LTO tape in permission denied state ??"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:08 EDT