From: Dave Markham (dave.markham@fjserv.net)
Date: Fri Jun 02 2006 - 08:45:06 EDT
People im trying to work out if a Netra T1 i have has its pci slot spare
so i can put a Gig Ethernet card in it.
The unit is remote located so i cant just eyeball it.
>From prtdiag i see the following :-
System Configuration: Sun Microsystems sun4u Netra T1 200
(UltraSPARC-IIe 500MHz)
System clock frequency: 100 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
0 0 0 500 0.2 13 1.4
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
0 PCI 66 5 network-pci108e,1101 SUNW,pci-eri
0 PCI 66 5 usb-pci108e,1103.1
0 PCI 66 8 scsi-glm/disk (block) Symbios,53C896
0 PCI 66 8 scsi-glm/disk (block) Symbios,53C896
0 PCI 66 12 network-pci108e,1101 SUNW,pci-eri
0 PCI 66 12 usb-pci108e,1103.1
0 PCI 66 13 ide-pci10b9,5229/disk (block)
No failures found in System
But am unsure how to tell for sure it is not filled. I think it isnt
filled from above as can account for those items being onboard.
Anyone help?
Cheers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:40:00 EDT