Solaris + RM6 question

From: Warren Liang (warren.liang@cox.net)
Date: Wed May 24 2006 - 14:12:07 EDT

• Next message: Olsen, Richard \(Cont, ARL/CISD\): "UPDATE V440 leaves nic down on boot"
• Previous message: Olsen, Richard \(Cont, ARL/CISD\): "V440 leaves nic down on boot"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Morning:

A Solaris 8 system with Sun StorEdge A3000+D1000s storage system. We use RM6
to manage the StorEdge.

A RAID 5 Group (Group 2) which consists of 5 LUNs, LUN 3 to 7. A disk went
down. After replaced it, all LUNs completed their reconstruction. Their Status
are bOptimalb, in most of caseb&

>From Recovery-Manual Recovery b Logical Units menu, it shows LUN4 as
Optimal; however, from any other place, it shows LUN 4 is Degraded.

Try to Manual Parity Check/Repair, high light LUN 4, but bStart Parity
Check/Repairb task bar becomes dim. All devices are in bOptimalb state.

Any recommendation is welcomed. Thanks in advance.
Warren
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Olsen, Richard \(Cont, ARL/CISD\): "UPDATE V440 leaves nic down on boot"
• Previous message: Olsen, Richard \(Cont, ARL/CISD\): "V440 leaves nic down on boot"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:57 EDT