From: devendra burman (devendra_burman@yahoo.com)
Date: Tue May 16 2006 - 19:21:24 EDT
Hi All,
I am working on Flash Archive and the archive is store in tapes. In some server a perticular tape is /dev/rmt/0 while on other it is /dev/rmt/1. So with flash_profile on jumpstart has an entry:
archive_location local_tape /dev/rmt/0
I need to configure jumpstart in such a way that if /dev/rmt/0 is not available then it should point to /dev/rmt/1.
Can flash_profile contains two archive locations like:
archive_location local_tape /dev/rmt/0
archive_location local_tape /dev/rmt/1
OR
Can I put something like:
archive_location local_tape /dev/rmt/?
Please guide me with a solution.
Thanks in advance,
Devendra
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:53 EDT