From: Young (yssong66@gmail.com)
Date: Fri May 12 2006 - 13:02:41 EDT
On my Sun Fire-480R server, I get to see only one entry instead of 2 with
luxadm qlgc command. I have one Qlogic single-channel 2Gb HBA installed on
this server. In addition to the entry that I see for the HBA card, the other
entry for the FC bus driver should be displayed from what I've seen on other
servers. Does anyone know why and advise me if this is OK? One impact is
that I didn't have any problem seeing and using SAN disks but when I tried
configuring a FC-attached tape library and its 2 drives, only one drive is
visible no matter what I tried and I know that I don't have a HW problem on
this server as far as I know.
# luxadm qlgc
Found Path to 1 FC100/P, ISP2200, ISP23xx Devices
Opening Device: /devices/pci@9,600000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: ISP2200 FC-AL Host Adapter Driver:
1.1401/11/20
Complete
Thank you in advance!
- Young
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:51 EDT