From: Bill Fitts (bfitts@bama.ua.edu)
Date: Thu Apr 13 2006 - 14:59:18 EDT
I believe that I've gotten the backup software confused about the L25
tape library that it's dealing with. I changed the scsi cabling so
that each drive had it's own HBA, but didn't delete the library from
the software before doing so. Now using the Management console I can
detect both of the tape drives and build a storage node but when I
try to "configure all libraries" I get the following
Library 'M4 DATA@3.0.0' found on storage node 'webct.ua.edu' is not
auto-configurable because no serial number is returned.
Found the new Standard SCSI Jukebox M4 DATA@3.0.0. (<M4 DATA
MagFile 3.01 at SCSI Bus 3 Target 0 Lon 0>)
But there is a problem communicating with this library (M4
DATA@3.0.0.). It may be claimed by another driver.
I'm guessing that I need to reset the software (Enterprise Backup
Software 7.3) but have no idea how to do it. Does anybody?
Thanks in advance.
Bill Fitts
Web Developer
Technology Center
The University of Alabama
A314 Gordon Palmer Hall
(205) 348-9780
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:35 EDT