From: Stevens, Kenneth (Kenneth.Stevens@rentsys.com)
Date: Mon Apr 10 2006 - 12:00:33 EDT
Good morning everyone,
Durring the setup of a Solaris 10 x86 Jumpstart server I recieved an error
when adding a SPARC client stating there is no miniroot for this arch type.
The system does not have a SPARC miniroot in the /Solaris_10/Tools/Boot
directory (only a .x86 image is present). My question is can I simply copy
the miniroot from a working SPARC jumpstart server to the Boot directory or is
there additional configuration changes required?
Jumpstart Server Specs:
HP DL380-G4
4*36 GB drives w/ RAID 0
Solaris 10 x86 OE
Jumpstart clients will include a variety of Sun V480, E250, E350, and a x86 HP
DL380-G4
Any suggestions or insight into this procedure would be greatly appreciated,
this my first time working with Solaris 10 x86 OE so please excuse any obvious
oversights.
Thanks to everyone in advance,
-Kenneth Stevens
Rentsys Recovery Services
Cell - (979)204-2017
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:33 EDT