From: Maggie Smith (maggie_logann@yahoo.com)
Date: Wed Jul 03 2002 - 13:18:39 EDT
Hello Everyone:
The network problem was solved by using
#ifconfig hme0 192.168.1.101 up netmaske 255.255.255.0 broadcast 192.168.1.255
and gave the 192.168.1.101 IP address in hosts file.
Thank you all of you with response and good suggestions who are:
Darren Dunham <ddunham@taos.com>
Mohan Doraiswamy <mohan.doraiswamy@overture.com>
Matt Ryanczak <ryanczakm@arin.net>
Alex Stade <alex@trdlnk.com>
Steve Mickeler <steve@neptune.ca>
Graham Wood <rauxon@dragonhold.org>
Varadharajan, Sriram <sriram.varadharajan@cgey.com>
Chunhang Gong <cg98ah@yahoo.ca>
Mike's List <mikelist@sky.net>
Joe Fletcher <joe.fletcher@btclick.com>
Pierre Zimmermann <Pierre.Zimmermann@tecnomen.fi>
Steudten Thomas (KTPZ 2) <thomas.steudten@csfs.com>
McAlister, Bruce <Bruce.McAlister@irl.xerox.com>
system administration account <sysadmin@astro.su.se>
Thomas M. Payerle <payerle@physics.umd.edu>
Massaraskiy, Leonid <lmassars@bnl.gov>
Timon, John <John.Timon@labatt.com>
Place, Richard <rplace@uslec.com>
Broderick, Sean <Sean.Broderick@irl.xerox.com>
Kevin Buterbaugh <Kevin.Buterbaugh@lifeway.com>
N Muralidhara <mdhara@cgsmith.soft.net>
Eduardo Armijo Salinas <earmijo@uchile.cl>
THANKS!
Maggie Smith Logann
email: maggie_logann@yahoo.com
> Hello everyone,
>
>
>
> The message I got using "ifconfig -a" is
>
>
>
> Lo0: flages=849<UP, LOPBACK, RUNNING, MULTICAST> mtu 8232
>
> inet 127.0.0.1 netmask ff000000
>
> hme0: flags=862<BROADCAST, NOTRAILERS. RUNNING, MULTICAST> mtu 1500
>
> inet 127.0.0.1 netmask ff000000 broadcast 127.255.255.255
>
> If I pinged the gatways, I got the following message:
>
> #ping 192.168.1.1
>
> ICMP NET Unreachable from gatewaylocalhost 127.0.0.1
>
> for icmp from localhost (127.0.0.1) to 192.168.1.1
>
> no answer from 192.168.1.1
>
>
>
>
> Any suggestions?
>
>
>
> Thanks a lot!
> >> > Maggie > > > >
-------- > > Include the previous e-mail: > >
>>I have a ultra 60 bought from China (voltage: 220 V). I can use the
> >
>>machine with solairs 2.6 with a power converter. However,
> >
>>I could not connect to the network using dhcp. The listed
> >
>>information using "ifconfig -a" looks ok for me.
> >
>>Does anyone have any ideas and suggestions?
> > > =========== > >
New! SBC Yahoo! Dial - 1st Month Free & unlimited access
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:33 EDT