setting color depth

From: Tim Longo (tlongo@avaya.com)
Date: Wed Mar 01 2006 - 08:25:14 EST

• Next message: Scott Lee: "E6500 1000 SX works with Netgear but not on Cisco"
• Previous message: Johnson, Chad: "Solaris 9 Bad Superblock and fsck -o b=<altername #> does not work SUMMARY"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Greetings:

I decided to perform a clean install of Solaris 9 on my trusty Sunblade
100. All went well, but my display is not quite back to the way it was
before. The machine has an Elite3D-lite card, and I was able to reset
the resolution with the fbconfig command, but I can't figure out how to
change the color depth.

Any reminders would be appreciated. Thank you!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Scott Lee: "E6500 1000 SX works with Netgear but not on Cisco"
• Previous message: Johnson, Chad: "Solaris 9 Bad Superblock and fsck -o b=<altername #> does not work SUMMARY"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:10 EDT