From: Chris Pelton (cpelton@fxcm.com)
Date: Thu Feb 23 2006 - 14:26:48 EST
found a good response earlier in this very list. not quite the same
situation, as the disks are the same size, but the methods are what i
needed.
http://www.sunmanagers.org/pipermail/summaries/2005-February/006160.html
thanks to those who responded so quickly!
-chris
>>> Chris Pelton 2/23/2006 1:40 pm >>>
hi all,
is it possible to manually change what solaris sees for disk geometry?
i need to replace a mirrored disk in Sol8, DiskSuite 4.2.1 and would
prefer to change the geometry table if possible rather than manually
creating partitions of the same cylinder size. i recall doing this
before but can't locate the method used.
thanks,
chris
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:04 EDT