From: Mario (mazza76@gmail.com)
Date: Mon Feb 20 2006 - 05:27:24 EST
Hi Sunmanagers,
I want to add partitions to a disk which has live slices on it. I have
worked out the new layout and I will not be touching the existing areas.
I'm being paranoid, but I want to make sure that when I re-label the
disk, the existing partitions will not be affected in any way.
Some background:
o;?Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 usr wm 0 - 124 176.33MB (125/0/0) 361125
1 usr wm 125 - 5569 7.50GB (5445/0/0) 15730605
2 backup wu 0 - 24619 33.92GB (24620/0/0) 71127180
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 usr wm 24615 - 24618 5.64MB (4/0/0) 11556
I was going to create a new partition on slice 3, starting at cylinder
5570. Its size will be 3629 cylinders.
Kind Regards
Mario
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:39:01 EDT