From: Tom Lieuallen (toml@engr.orst.edu)
Date: Thu Feb 02 2006 - 01:07:02 EST
We've got a handful of v440's and we're trying to use the built-in
hardware raid. used it in solaris 8 with no problems. now with solaris
10, we've got a few problems. Two v440's with just internal disks are
fine -- hardware mirror first two disks and software mirror the other two
disks.
However, we have 3 other 440's that are connected to EMC RAIDs and are
using EMC's powerpath for multipath and failover. We're guessing this is
the problem, considering the 440's without the EMC's just plain worked.
# raidctl -c c1t0d0 c1t1d0
config_change_state: Error 0
Tried opening a call with Sun. No luck there. We'll try EMC next, but
perhaps someone else has been here before.
thank you
Tom Lieuallen
Oregon State University
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:49 EDT