metad client create: RPC: rpcbind failure

From: ssloh@singnet.com.sg
Date: Fri Dec 02 2005 - 23:17:09 EST


Hi Folks,

Solaris 10 running SunCluster 3.1 using SVM. The problem is while I trying to create the diskset using command
#metaset -s orads -a -h node1 node2
 node2 : metad client create: RPC: rpcbind failure

I tried the same command at node2 with the same error output
So somethings is amiss at node2.
While I tried #metaset -s orads -a -h node1, it was successfully created. Then I tried to add node2 into this diskset, it failed too with same error.

I had make sure both nodes have all the required rpc running
#ps -ef | grep rpc
node2 was reboot with -r and rpcbind was restarted. There is not firewall in between nor TPC wrapper. Now I am in the dead end of what is going on. Could yours please help. thanks a lot....
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:23 EDT