From: dhedge (dhedge@crowncollege.edu)
Date: Mon Nov 28 2005 - 21:35:46 EST
Dear SunManagers,
I've got a Sunfire v120 that has suddenly gone unresponsive. Serial port
A/LOM spits output only on a hard power reset(when you pull and replugin
the power cord):
============================================================
LOMlite starting up.
CPU type: H8/3437S, mode 3
Ram-test: 2048 bytes OK
Initialising i2c bus: OK
Searching for EEPROMs: 50(cfg)
I2c eeprom @50: OK
i2c bus speed code 01... OK
Probing for lm80s: 28
Initialising lm80 @28: OK
Probing for lm75s: none
System functions: PSUs fans breakers rails gpio temps host CLI ebus clock
Power restored
LOMlite console
lom>
LOM event: +0h0m0s LOM booted
lom>
LOM event: +0h0m0s host power on
@Error in calc_mcr3 ()
============================================================
Then it hangs.
Serial B spits out a grand total of this "[+" under the same
circumstances.
As far as I am aware nothing changed configuration wise.
I saw on sun's forums another person getting the same behavior on a
Sunfire v100, but there was no resolution or explanation posted. Does
anyone out there have any clue what this is?
Thank you for any help you can give.
Daniel
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:11 EDT