From: Santhakumar S (santhas@tpg.com.au)
Date: Thu Sep 08 2005 - 07:57:37 EDT
Managers,
So far I have received some valuable inputs from the managers:
Suresh Bangalore, No SPAM, Michael Hocke, Cole William, Jeff Dinisco,
Bernd Schemmer, bhuber, Polachak Jason, Hirchert Dale L
and general concern is not to do with meta devices. But as per managers
who sucessfully done this I followed their steps:
In my finish script
1. I am zeroing out /a/etc/lvm/md.cf and /a/etc/lvm/mddb.cf files
2. Creating /a/etc/vfstab and /a/etc/system files w/o meta reference.
Now it goes pass the previous step but complains that c1t0d0s0 ( my /
partion) is not this type file system and /etc/passwd file is in use
therefore root password can't be set now. Also read only file system.
The image I am using came from the same system (v240 jumpstarted w/o
flash install, patched and meta devices setup during the
JS and system was stable when I created the flash image).
Has anyone else sucessfully JS flash installed with meta ( mirrored
devices) device image ?
Thanks
San
Dear Managers,
I have a problem with my JS/Flash install. I have no problem with my JS
but this is my first attempt with Flash install. I have created a
compressed system image ( a stable Sol 8 with meta devices) using
flarcreat command. JS installs fine using flash image, but problem starts
during the reboot:
Installing boot information
- Installing boot blocks (c1t0d0s0)
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Flash installation complete
Executing JumpStart postinstall phase...
Executing finish script "Finish_scripts/v240-2048mb-flash-inst.driver"...
Starting finish script: clean_temp_files.sh
Finish script Finish_scripts/v240-2048mb-flash-inst.driver execution completed.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
Sep 6 23:13:34 rpcbind: rpcbind terminating on signal.
syncing file systems... done
rebooting...
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V240, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.2, 2048 MB memory installed, Serial #63014961.
Ethernet address 0:3:ba:c1:88:31, Host ID: 83c18831.
Rebooting with command: boot
Boot device: disk0:a File and args:
SunOS Release 5.8 Version Generic_117350-15 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_hotspares failed
WARNING: forceload of misc/md_sp failed
panic[cpu1]/thread=10408000: Could not install the isa driver
0000000010407970 unix:post_startup+2c (104756d0, 10408004, 22, 1,
10408004, 1040
7ffc)
%l0-3: 000000001041c2c8 00000000104072f1 000000103e000000
00000000104375f8
%l4-7: 0000000000000000 0000000010413da0 00000000000c1156
0000000000001156
0000000010407a20 genunix:main+ac (104101f8, 2000, 10407ec0, 10408030,
fff2, 1005
3dfc)
%l0-3: 0000000000000001 0000000000000001 0000000000000015
0000000000000f62
%l4-7: 000000001042a1c8 00000000104791b8 00000000000d9a90
0000000000000540
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
My questions are;
1. My imgae was created from meta a system that has meta devices, therefore do I have to install SDS pakages
before the reboot?
2. Can JS install from the compressed image or do I have to use un-compressed imgae?
3. Has anyone come accross this before?
I will summarize
Thanks
San
Thanks
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:34 EDT