From: Mark (mark@proser.co.uk)
Date: Tue Sep 06 2005 - 09:26:48 EDT
Hi,
A customer is having a problem with an E450 with a L280 autoloader. The L280
has just been replaced but Legato Networker is unable to see it if you run
nsrjb (or any options).
If you run inquire the output is :
.
.
.
scsidev@1.6.0:TOSHIBA XM6201TASUN32XCD1103|CD-ROM, /dev/rdsk/c1t6d0s2
scsidev@2.0.0:HITACHI DK32EJ36NSUN36G PQ08|Disk, /dev/rdsk/c4t0d0s2
S/N: 09S0W5TS0040A32E0787
ATNN:HITACHI DK32EJ-36NC
432W3481
scsidev@2.1.0:FUJITSU MAN3367M SUN36G 1804|Disk, /dev/rdsk/c4t1d0s2
S/N: UFA3P2105C7W
scsidev@4.0.0:QUANTUM DLT7000 2560|Tape, /dev/rmt/1cbn
S/N: PXB06S3443
scsidev@6.0.0:FUJITSU MAG3091L SUN9.0G1111|Disk, /dev/rdsk/c2t0d0s2
S/N: 02424868
Where it can see the tape drive at 4.0.0 but not the jukebox which should be
at 4.1.0
If the SCSI cable is pluged into a SE card would the OS still be able to see
the tape drive and not the jukebox ???
The cabling on the back of the jukebox looks okay as they have sent a pic
over.
All my help is being done over the phone !!
Any help would be appriciated and I'll summerise
Regards
Mark Casey
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:32 EDT