From: zzassgl@zoe.mcc.ac.uk
Date: Fri Aug 26 2005 - 08:52:43 EDT
Nobody could suggest a method to prevent SRS Net Connect attempting to check
on devices that were expected to have non-Solaris labels.
It was pointed out that you can limit device visibility at various points on
a SAN but that cannot be done in my situation.
On Wed, Aug 24, 2005 at 11:38:29AM +0100, zzassgl@zoe.mcc.ac.uk wrote:
> We have SRS Net Connect installed on a number of Solaris9 systems in a
> cluster. The cluster uses a fibre attached storage array and qlogic HBAs to
> provide LUNs to the cluster members.
>
> A few of the servers in the cluster are running Linux and Win2000 and they
> to make use of LUNs on the storage array.
>
> Unfortunately, all the LUNs are visible on all servers (a mistake I hope to
> avoid next time.) When SRS Net Connect checks the state of the SCSI devices,
> it sees all the LUNs and tries to check the labels. Of course, the labels
> for the LUNs connected to non Solaris systems are not as expected and it
> spits out many warnings to the messages file.
>
> I've scanned all the online docs for SRS Net Connect but can't find any way
> to exclude some devices from its scans.
>
> Is there any way to exclude a list of devices from those that SRS Net
> Connect scans?
>
> Thanks,
>
> --
> | Geoff. Lane | ITs | Manchester | M13 9PL | England |
>
> Today's Excuse: Fatal error right in front of screen
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
-- | Geoff. Lane | ITs | Manchester | M13 9PL | England | BREAKFAST.COM Halted... Cereal Port Not Responding. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:31:24 EDT